Marker Lamp: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precations.

1. Disconnect the negative battery cable.
2. Remove the 2 screws which secure the tail lamp (5).
3. Pull the tail lamp (5) away from the rear end panel in order to gain access to the socket of the marker lamp bulb.
4. Remove the marker lamp socket from the tail lamp (5).
5. Remove the marker lamp bulb (4) from the socket.

INSTALLATION PROCEDURE
1. Install the marker lamp bulb (4) to the marker lamp socket.
2. Install the marker lamp socket to the tail lamp (5).
3. Install the tail lamp (5) to the rear end panel. Secure the lamp with the 2 screws
4. Connect the negative battery cable.