| Brush Length-Standard | 17.5 Millimeter (mm) |
| Brush Length-Minimum | 12.0 Millimeter (mm) |
| Brush Spring Tension-Standard | 2.1 Kilogram-Force (kgf) |
| Brush Spring Tension-Minimum | 0.7 Kilogram-Force (kgf) |
| Commutator Insulation Depth-Standard | 0.5-0.8 Millimeter (mm) |
| Commutator Insulation Depth-Minimum | 0.2 Millimeter (mm) |
| Commutator Outside Diameter-Standard | 29.4 Millimeter (mm) |
| Commutator Outside Diameter-Minimum | 28.8 Millimeter (mm) |
| Commutator Run-Out-Standard | 0.05 Millimeter (mm) |
| Commutator Run-Out-Maximum | 0.40 Millimeter (mm) |
| Direction of Rotation | Clockwise (as viewed from pinoin) |
| Number of Pinion Teeth | 8 |
| Output | 1.2 Kilowatts (kW) |
| Rating | 30 seconds |
| Solenoid Operating Voltage | maximum 8 Volts (V) |
| Starter Motor Current Draw-No-Load | 50-75 at 11 Amperes At Volts (A @ V) |
| Starter Motor Current Draw-Load (9.1 N.m 80.5 lb in of torque) | 300 at 7.7 Amperes At Volts (A @ V) |
| Starter Motor Current Draw-Locked Rotor (18.6 N.m / 13.7 lb ft of 780 amps max. at 4 volts torque) | 780 at 4 Amperes At Volts (A @ V) |
| Voltage | 12 Volts (V) |