49. Valve Rocker Arm and Shaft Installation

1. Apply clean engine oil to the following components:
^ The rocker-arm shaft
^ The rocker Arms (1, 2)
2. After applying the engine oil to the rocker-arm shafts and to the rocker arms, do the following. Carefully slide the rocker-arm shaft into the cylinder head with the holes facing up while installing the exhaust rocker-arms and the springs in the correct sequence.





3. Install the rocker-arm shaft bolts (1).
Tighten the rocker-arm shaft bolts to 11 Nm (97 inch lbs.).





4. Install the intake rocker arms (1) onto the rocker-arm shaft in the correct sequence.