Ignition Cable: Description and Operation

The secondary (spark plug) wiring used with the ignition system withstands very high temperatures, thus providing an excellent insulator for the high voltages generated by the ignition system. The spark plug boot forms a tight seal on the spark plug. The boot should always be twisted one-half turn before removing the secondary wire from the spark plug.

The material used to construct the secondary wiring is very soft. This allows the wiring to withstand more heat and carry a higher voltage than traditional wiring; however, the wire is more susceptible to scuffing and damage. The secondary wires must be routed correctly to prevent chafing or cutting. When removing a secondary wire from a spark plug, a distributor, or an ignition coil, twist the boot one-half turn and pull on the boot only.