Two-Door

REPLACEMENT PROCEDURE
1. Remove the rear seat child restraint anchor bolt cap (3) from the rear end interior trim panel (1).
(Two restraint anchor caps are located in the rear end interior trim panel; one for the right-side rear seat and one for the left-side rear seat).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the rear seat child restraint anchor bracket (2) to the rear end of the vehicle. Secure the bracket with the anchor bolt.

Tighten
Tighten the rear seat child restraint anchor bracket retaining bolt to 45 N.m (33 lb ft).

IMPORTANT: No center seating position is provided for the child seat in the rear seat.

3. Replace the restraint anchor bolt cap.