Drive Belt: Service and Repair

Removal Procedure

^ Tools Required
- J 37059 Accessory Drive Belt Tensioner Wrench

Caution: To avoid personal injury when rotating the accessory drive belt tensioner, use a tight fitting 13 mm wrench that is at least 46 cm (18 inch) long.





Remove the accessory drive belt by rotating the tensioner using J 37059.

Installation Procedure

Caution: To avoid personal injury when rotating the accessory drive belt tensioner, use a tight fitting 13 mm wrench that is at least 46 cm (18 inch) long.





Install the accessory drive belt by rotating the tensioner using J 37059.