Fuel Injector Balance Test
Diagnostic Chart (Part 1 Of 2):
Diagnostic Chart (Part 2 Of 2):
Schematic:
Injector Balance Test Example (Typical):
TEST DESCRIPTION
CAUTION: Refer to Shop Towel Fuel Leak Caution in Service Precautions.
4. The engine coolant temperature must be below the operating temperature in order to avoid irregular fuel pressure readings due to Hot Soak fuel boiling.
7. If the pressure drop value for each fuel injector is within 10 kPa (1.5 psi) of the average pressure drop value the fuel injectors are flowing properly. Calculate the pressure drop value for each fuel injector by subtracting the second pressure reading from the first pressure reading. Refer to the illustration above.