Fuel Tank Pressure Sensor: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure. Service and Repair
3. Drain the fuel tank. Refer to Fuel Tank Draining Procedure. Procedures
4. Remove the fuel tank.
5. Disconnect the fuel tank pressure sensor connector.




6. Remove the fuel tank pressure sensor from the modular fuel sender.

INSTALLATION PROCEDURE




1. Install the new fuel tank pressure sensor to the modular fuel sender.




2. Connect the fuel tank pressure sensor connector.
3. Reinstall the fuel tank.
4. Refill the fuel tank.
5. Reconnect the negative battery cable.