Radio, Stereo, and Compact Disc: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Remove the accessory trim plate.
3. Remove the radio mounting screws.
4. Pull the radio (2) rearward.
5. Disconnect the following radio components:
^ All electrical connections
^ The antenna lead connection
6. Remove the radio from the vehicle.

INSTALLATION PROCEDURE
1. Connect the following radio components:
^ All electrical connections
^ The antenna lead connection
2. Install the radio (2) to the vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the radio mounting screws.

Tighten
Tighten the radio mounting screws to 3 N.m (25 lb in).

4. Install the accessory trim plate.
5. Connect the negative battery cable.