Hood Latch Support Replacement

Hood Latch Support Replacement

Removal Procedure

1. Open the hood.
2. Remove the front filler panel.
Pull the retainers outward.
3. Remove the hood primary and secondary latch.
4. Raise and support the vehicle. Refer to Vehicle Lifting.




5. Remove the hood latch support nuts (2).
6. Remove the hood latch support bolts (1).
7. Remove the hood latch support (3).

Installation Procedure




1. Install the hood latch support (3).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the hood latch support bolts (1).

Tighten the bolts to 9 N.m (80 lb in).

3. Install the hood latch support nuts (2).

Tighten the nuts to 25 N.m (18 lb ft).

4. Install the hood primary and secondary latch.
5. Install the front filler panel.
Ensure the unit is retained.
6. Close the hood.