Rear Split Folding Seat Back Bolster Replacement

Rear Split Folding Seat Back Bolster Replacement

Removal Procedure

1. Remove the rear seat cushion.




2. Remove the bolt from the lower U-bracket.
3. Lift up the rear seat back bolster to disengage the T-hook from the access hole in the rear shelf.
4. Remove the rear seat back bolster.

Installation Procedure




1. Pull the shoulder belt away from the rear seat back bolster area.
2. I.
3. Position and engage the T-hook into the access hole in the rear shelf panel.
4. install the rear seat back bolster pulling forward on the top edge of the rear seat back bolster in order to ensure that the attaching hook is properly engaged.

Notice: Refer to Fastener Notice in Service Precautions.

5. Install the seat back bolster bolt into the lower U-bracket.

Tighten the seat back bolster bolt to 12 N.m (106 lb in).

6. Install the rear seat cushion.