A Symptoms
IMPORTANT: The following steps must be completed before using the symptom tablesPerform the Diagnostic System Check before using the symptom table in order to verify that all of the following are true:
^ There are no DTCs set.
^ The module(s) can communicate via the serial data link.
^ Review the system operation in order to familiarize yourself with the system functions. Refer to the following:
Cruise Control System Operation
Visual/Physical Inspection
^ Inspect for aftermarket devices which could affect the operation of the cruise control system. Refer to Checking Aftermarket Accessories in Diagrams.
^ Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent aid Poor Connections in Diagrams.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
^ Cruise Control Inoperative/Malfunctioning
^ Cruise Control Inoperative/Malfunctioning Using J 42958 Cruise Control Tester
^ CRUISE Indicator Always On
^ CRUISE Indicator Inoperative