Radiator Cooling Fan Motor: Service and Repair

Always consult a parts catalog. The electric cooling fan motors, fans, shrouds, and brackets may be available separately.

Removal Procedure

Caution: To help avoid personal injury or damage to the vehicle, a bent, cracked, or damaged fan blade or housing should always be replaced.

Caution: Refer to Battery Disconnect Caution in Service Precautions.





1. Disconnect the negative battery cable.
2. Remove the bolt which retains the A/C line.
3. Remove the 4 upper fan bolts.
4. Raise the vehicle. Refer to Vehicle Lifting.
5. Remove the 4 lower fan bolts.
6. Disconnect the electrical connector.
7. Remove the fan from the shroud.

Installation Procedure





1. Install the fan.
2. Install the upper fan bolts.
3. Raise the vehicle. Refer to Vehicle Lifting.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the lower fan bolts.
- Tighten the bolts to 10 Nm (89 inch lbs.).
5. Connect the electrical connectors.
6. Connect the negative battery cable.
- Tighten the bolt to 16 Nm (12 ft. lbs.).