Manual Transmission - M86/M94 Getrag

Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the left front wheel and tire. Refer to Tire and Wheel Removal and Installation in Steering and Suspension.
3. Disconnect the backup lamp switch harness connector.





4. Remove the backup lamp switch from the transaxle.

Installation Procedure





1. Install the backup lamp switch to the transaxle.





2. Connect the backup-lamp switch harness connector.
3. Install the front left wheel and tire. Refer to Tire and Wheel Removal and Installation in Steering and Suspension.
4. Lower the vehicle.