General Information

Aim the headlamps for proper illumination of the road. Inspect the headlamp aim under the following conditions:
^ When a new headlamp assembly is installed
^ If service or repairs to the front end area have (or may have) disturbed the headlamps or the mounting

Headlamp focus is set when the unit is made. No adjustment for focus is necessary or possible.

IMPORTANT: Some state or province and local laws specify requirements for headlamp aim. Follow those laws.

Horizontal aim is performed by an adjusting screw on the inboard side of the headlamp assembly. Vertical aim is performed by an adjusting screw in the upper outboard area. When aiming the headlamps, follow the instructions below.