Accelerator Pedal: Service and Repair

REMOVAL PROCEDURE
1. Remove the left instrument panel sound insulator.
2. Disconnect the accelerator cable from the accelerator pedal.
3. Remove the accelerator pedal nuts to cowl.
4. Remove the accelerator pedal assembly.

INSTALLATION PROCEDURE
1. Position the accelerator pedal assembly.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the accelerator pedal nuts to cowl.

Tighten
Tighten the accelerator pedal nuts at cowl to 30 N.m (25 lb ft).

3. Connect the accelerator cable to the accelerator pedal.
4. Inspect for complete throttle opening and closing positions by operating the accelerator pedal. Also inspect for poor carpet fit under the accelerator pedal.
5. Install the left instrument panel sound insulator.