Procedures

TOOLS REQUIRED
^ J 42960-2 Fuel Flapper Door Holder
^ J42960-1 Fuel Drain Hose

DRAINING PROCEDURE

CAUTION:
^ Never drain or store fuel In an open container. Always use an approved fuel storage container in order to reduce the chance of fire or explosion.
^ Place a dry chemical (Class B) fire extinguisher near work area before attempting any On-Vehicle Service.

1. Remove the fuel tiller cap.
2. Install the J 42960-2 fuel flapper door holder into the fuel till pipe in order to hold the door open.
3. Insert the J42960-1 fuel drain hose into the fuel tank until the hose reaches the bottom of the fuel tank.
4. Use an air operated pump device in order to drain as much fuel through the fuel fill pipe as possible.