Removal and Replacement

Door Lock Switch Replacement (Pontiac)

Removal Procedure




1. Use a flat-bladed tool in order to pry the front door switch bezel assembly (1) upward. Use inboard pressure against the rear retaining clip.
2. Disconnect the power door lock switch electrical connectors. Slide a flat-bladed tool between the switch and the bezel in order to release the retainers.
3. Remove the power door lock switch from the bezel.

Installation Procedure




1. Install the power door lock switch to the bezel. Ensure that the retainers are locked into position.
2. Connect the power door lock switch electrical connectors.
3. Install the front door switch bezel assembly (1) to the front door trim panel. Ensure that the retainers are locked into position.