Wheel Speed Sensor Jumper Harness Replacement- Rear

Removal Procedure





1. Raise and support the vehicle on a suitable hoist. Refer to Vehicle Lifting.
2. Disconnect the two rear wheel speed sensor electrical connectors from the rear wheel bearing and speed sensor assemblies.





3. Disconnect the rear wheel speed sensor harness electrical connector (3) from the body connector.





4. Remove the rear wheel speed sensor harness retainers.
5. Remove the rear wheel speed sensor harness (1) from the vehicle.

Installation Procedure





1. Install the rear wheel speed sensor harness (1) to the vehicle.
2. Install the rear wheel speed sensor harness retainers.





3. Connect the rear wheel speed sensor harness electrical connector (3) to the body connector.




4. Connect the two rear wheel speed sensor electrical connectors to the rear wheel bearing and speed sensor assemblies.
5. Lower the vehicle. Refer to Vehicle Lifting.
6. Perform the A Diagnostic System Check - ABS.