Wheel Alignment Specifications
| 2 Door - P215/60R15 All measurements are taken with a full tank of fuel. The measurements for D,J,K and Z all have -3/8 - +3/8 tolerance | FE2 Suspension | Z | 0 |
| D | 4 27/32 | ||
| J | 9 21/64 | ||
| K | 9 39/64 | ||
| 4 Door P225/50R16 All measurements are taken with a full tank of fuel. The measurements for D,J,K and Z all have -3/8 - +3/8 tolerance | FE2 Suspension | Z | 15/64 |
| D | 4 3/4 | ||
| J | 9 21/64 | ||
| K | 9 21/64 | ||
| 2 Door - P225/50R16 All measurements are taken with a full tank of fuel. The measurements for D,J,K and Z all have -3/8 - +3/8 tolerance | FE3 Suspension | Z | 13/64 |
| D | 4 49/64 | ||
| J | 9 21/64 | ||
| K | 9 39/64 | ||
| 4 Door P225/50R16 All measurements are taken with a full tank of fuel. The measurements for D,J,K and Z all have -3/8 - +3/8 tolerance | FE3 Suspension | Z | 13/64 |
| D | 4 49/64 | ||
| J | 9 21/64 | ||
| K | 9 39/64 | ||
| Front Caster | Alignment Specifications | 4.10 | |
| Tolerance | 3.10 - 5.10 | ||
| Front Camber | Alignment Specifications | -0.20 | |
| Tolerance | -1.20 to +0.80 | ||
| Individual Toe Measure the above Toe angles with the steering wheel at level postion, visually aligned with column. | Alignment Specifications | 0.05 | |
| Tolerance | -0.07 to +0.17 | ||
| Sum Toe | Alignment Specifications | 0.10 | |
| Tolerance | -0.15 to +0.35 | ||
| Cross Camber (Slight Cross Camber differences can be made when servicing the vehicle for steering pull.) | Alignment Specifications | 0.00 | |
| Tolerance | -1.00 to +1.00 | ||
| Cross Caster | Alignment Specifications | 0.00 | |
| Tolerance | -1.00 to +1.00 | ||
| Rear Camber | Alignment Specifications | 0.00 | |
| Tolerance | -0.70 to +0.30 | ||
| Rear Sum Toe | Alignment Specifications | -0.20 | |
| Tolerance | -0.26 to +0.14 | ||
| Rear Thrust Angle | Alignment Specifications | 0.00 | |
| Tolerance | -0.20 to +0.20 |