Shifter M/T: Service and Repair

Shift Control

Removal Procedure





1. Remove the shift cables from the shifter assembly. Refer to Shift Cables.
2. Disconnect the shift interlock cable.





3. Remove the 2 front mounting bolts.





4. Remove the 2 rear mounting bolts and the shifter.

Installation Procedure





1. Position the shifter on the studs and install the front 2 nuts.

Notice: Refer to Fastener Notice in Service Precautions.





2. Install the 2 rear bolts.
Tighten
Tighten the bolts to 25 Nm 18 ft. lbs.
3. Install the shift cables. Refer to Shift Cables.
4. Install the console. Refer to Console Replacement in Instrument Panel, Gauges and Warning Indicators.