Window Run Channel Replacement

REMOVAL PROCEDURE




1. Remove the inside handle bezel screw and remove the bezel.
2. Remove the door trim panel.
3. Remove the power door look switch.
4. Remove the window regulator handle.
5. Remove the water deflector.
6. Remove the bolts (2) which secure the window to the regulator, including the connection switch. Position the glass.
7. Lower the regulator and the glass.
8. Remove the inner belt sealing strip.
9. Remove the window.
10. Remove the run channel weather-strip from the windows.

INSTALLATION PROCEDURE




1. Install the run channel weather-strip to the window.
2. Install the front window.
3. Install the run channel weather strip to the window.
4. Install the inner belt sealing strip.
5. Raise the regulator and the glass.
6. Install the bolts which secure the window (1) to the regulator.
7. Install the water deflector.
8. Install the door panel to the door.
9. Install the door panel screws.
10. Install the door deflector.
11. Install the window regulator handle.
12. Install the power door lock switch.
13. Install the door upper trim panel.
14. Install the inside handle bezel.