Alarm Mode

In the alarm mode, the security LED is on.
The BCM flashes the headlamps and sounds the horn alternately for 2 minutes. The content theft deterrent system then enters the re-arm wait mode.

The content theft deterrent system stays in the alarm mode until one of the following actions occurs:
- LOCK is pressed on the keyless entry transmitter. The system goes into the stand-by mode.
- The door is unlocked using the door key cylinder when the arm/disarm is in mode 1 or 3. The system goes into the stand-by mode.
- ALARM is pressed on the keyless entry transmitter. The system goes into the re-arm wait mode.