Front Door Adjustment
UP/DOWN OR IN/OUT ADJUSTMENTREMOVAL PROCEDURE
1. Loosen the two 13 mm front door side hinge bolts. Do not remove the bolts.
2. Adjust the front door up or down by repositioning the front door as needed.
3. Adjust the front door in or out by repositioning the front door as needed.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Tighten the two 13 mm front door side hinge bolts.
Tighten
Tighten the front door side bolts to 33 N.m (24 lb ft).
2. Inspect the door for proper operation.
FORE/AFT ADJUSTMENT
REMOVAL PROCEDURE
1. Remove the front fender insulator in order to gain access to the body side hinge bolts.
2. Loosen the two 13-mm body side hinge bolts (2). Do not remove the bolts.
3. Loosen one 10-mm cone adjuster body side hinge bolt (3). Do not remove the bolt.
4. Loosen one torx(R) body side hinge bolt (1). Do not remove the bolt.
5. Adjust the door for and aft by repositioning the door as needed.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Tighten one torx(R) body side hinge bolt (1).
Tighten
Tighten the bolt torx(R) head body side hinge to 10 N.m (89 lb in).
2. Tighten one 10-mm cone adjuster body side hinge bolt (3).
Tighten
Tighten the cone adjuster body side hinge bolt to 10 N.m (89 lb in).
3. Tighten two 13-mm body side hinge bolts (2).
Tighten
Tighten the body side hinge bolts to 33 N.m (24 lb ft).
4. Install the front fender insulator.