Trunk / Liftgate Hinge: Service and Repair
Rear Compartment Lid Hinge Replacement
Removal Procedure
1. Remove the rear compartment lid. Refer to Rear Compartment Lid Replacement (Rear Compartment Lid Replacement) .
2. Remove the rear compartment lid struts. Refer to Rear Compartment Lid Strut Replacement (Service and Repair) .
3. Use a grease pencil to mark the hinge to the quarter panel for the location at installation.
4. Remove the bolts from hinge at the quarter panel.
5. Remove the hinge.
Installation Procedure
1. Position the hinge to the alignment marks on the quarter panel.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the hinge to rear quarter bolts.
Tighten the rear compartment hinge to rear quarter bolts to 25 N.m (18 lb ft).
3. Install the rear compartment struts. Refer to Rear Compartment Lid Strut Replacement (Service and Repair) .
4. Install the rear compartment lid. Refer to Rear Compartment Lid Replacement (Rear Compartment Lid Replacement) .
5. Adjust the rear compartment lid height adjustment by using a wrench on the rear compartment hinge height adjustment bolt.
6. Adjust the rear compartment lid height adjustment by turning the rear compartment lid bumper by hand.
7. Close the rear compartment.