76. Crankshaft Balancer Installation

^ Tools Required
- J 29113 Crankshaft Balancer Installer





1. Apply sealer GM P/N 12345739 or the equivalent to the keyway of the crankshaft balancer.
2. Place the crankshaft balancer into position over the key in the crankshaft.
3. Install the J291130nto the crankshaft.
4. Pull the crankshaft balancer into position.
5. Remove the J 29113 from the crankshaft balancer.

Notice: Refer to Fastener Notice in Service Precautions.





6. Install the crankshaft balancer washer and bolt.
^ Tighten the crankshaft balancer bolt to 103 Nm (76 ft. lbs.).