Circuit Description

Voltage is applied continuously from the Park LPS fuse to the headlamp switch through circuit 1340. Voltage is applied through circuit 9 when the headlamp switch is in the PARK or the HEAD position. Current flows through circuit 9 to the following lamps, turning the lamps ON:
^ The park lamp
^ The side marker lamp
^ The tail lamp
^ The license lamps

The only lamps that do not turn ON and receive current from circuit 9 are the turn filaments in the park/turn lamps. The turn filaments in the park/turn lamps do not turn ON because the voltage drop across the front side marker lamps is much greater than that across the turn lamp filaments.