Horn Switch: Service and Repair
Removal Procedure1. Disable the SIR system. Refer to Disabling the SIR System in Air Bags and Seat Belts.
2. Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement.
3. Disconnect the horn wiring connector from the steering column.
4. Remove the bolts (5) from the horn switch (3).
5. Remove the horn switch (3) from the steering wheel (6).
Installation Procedure
1. Install the horn switch (3) to the steering wheel (6).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts (5) to the horn switch (3).
Tighten the horn switch bolts to 6 Nm (53 inch lbs.).
3. Connect the horn wiring connector to the steering column.
4. Install the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement in Air Bags and Seat Belts.
5. Enable the SIR system. Refer to Enabling the SIR System in Air Bags and Seat Belts.