Heater Pipe Replacement
REMOVAL PROCEDURETOOLS REQUIRED
J 38185 Hose Clamp Pliers
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Remove the air cleaner and duct assembly.
3. Disconnect the inlet hose (3) from the inlet pipe.
4. Use J 38185 in order to position aside the heater hose inlet clamp.
5. Remove the heater inlet adapter pipe mounting bolt.
6. Remove the heater inlet adapter pipe.
INSTALLATION PROCEDURE
1. Install the heater inlet adapter pipe.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the heater inlet adapter pipe mounting bolt.
Tighten
Tighten the heater inlet adapter pipe bolt to 6 N.m (53 lb in).
3. Connect the inlet hose (3) to the inlet pipe.
4. Use J 38185 in order to position the heater hose inlet clamp.
5. Install the air cleaner and duct assembly.
6. Refill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.