Wheel Speed Sensor Jumper Harness Replacement - Front

Removal Procedure
1. Raise and support the vehicle on a suitable hoist. Refer to Vehicle Lifting.





2. Disconnect the front wheel speed sensor jumper harness connector from the ABS harness connector (1).
3. Remove the front wheel speed sensor jumper harness (2) from the control arm retaining clips (3).





4. Disconnect the front wheel speed jumper harness connector (1) from the front wheel speed sensor connector (3).
5. Remove the front wheel speed sensor jumper harness (2) from the vehicle.

Installation Procedure





1. Connect the front wheel speed sensor jumper harness connector (1) to the front wheel speed sensor connector (3).





2. Install the front wheel speed sensor jumper harness (2) to control arm retaining clips (3).
3. Connect the front wheel speed sensor jumper harness connector to the ABS harness connector (1).
4. Lower the vehicle.
5. Turn the ignition switch to the RUN position, with the engine off.
6. Perform the A Diagnostic System Check - ABS.