Shift Control Replacement

Removal Procedure





1. Remove the horseshoe clip (1) from front of shift control knob, and remove knob.
2. Remove the Console Trim Plate. Refer to Trim Plate Replacement - Front Floor Console in Instrument Panel, Gauges and Warning Indicators.





3. Remove the console wiring harness.





4. Remove the console shift control wiring harness.
5. Remove the automatic transaxle range selector cable. Refer to Automatic Transmission Range Selector Cable Replacement (New Cable Installation Only) or Automatic Transmission Range Selector Cable Replacement (At PNP Switch) or Automatic Transmission Range Selector Cable Replacement (At Console Shift).
6. Remove the park/lock cable. Refer to Park Lock Cable Replacement.





7. Remove the console shift control nuts.
8. Remove the console shift control.

Installation Procedure





1. Install the console shift control.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the console shift control nuts.
^ Tighten the console shift control nuts to 24 Nm (18 ft. lbs.).
3. Install the park/lock cable. Refer to Park Lock Cable Replacement.
4. Install the automatic transaxle range selector cable. Refer to Automatic Transmission Range Selector Cable Replacement (New Cable Installation Only) or Automatic Transmission Range Selector Cable Replacement (At PNP Switch) or Automatic Transmission Range Selector Cable Replacement (At Console Shift).





5. Install the console shift control wiring harness.





6. Install the console wiring harness.
7. Install the Console Trim Plate. Refer to Trim Plate Replacement - Front Floor Console in Instrument Panel, Gauges and Warning Indicators.
8. Adjust the transaxle range selector cable. Refer to Automatic Transmission Range Selector Cable Replacement (New Cable Installation Only) or Automatic Transmission Range Selector Cable Replacement (At PNP Switch) or Automatic Transmission Range Selector Cable Replacement (At Console Shift) and/or Automatic Transmission Range Selector Cable Adjustment.