Engine Flywheel Replacement

Removal Procedure





1. Remove the automatic transaxle.
2. Secure the flywheel in order to prevent rotation.
3. Loosen the six flywheel bolts.
4. Remove five of the six flywheel bolts leaving one bolt at the top of the crankshaft rotation.
5. Grip the flywheel and remove the remaining bolt. Do not drop the flywheel when removing the final bolt.
6. Remove the engine flywheel and the flywheel retainer.
7. Clean the engine flywheel bolt threads and bolt holes.

Installation Procedure





1. Install the flywheel retainer and the flywheel.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the engine flywheel bolts.
^ Tighten the engine flywheel bolts to 71 Nm (52 ft. lbs.).
3. Install the automatic transaxle.