Finding A Station

Perform one of the following functions in order to select a station:
^ AM-FM-Press the AM-FM button in order to switch between AM, FM1 and FM2. The display shows the selection.
^ Tune-Press the Tune knob lightly so it extends. Turn the lower knob in order to choose the radio stations. Push the knob back in when not in use.
^ Seek-Press the UP or DOWN arrow in order to select the next higher or next lower station and remain there.
^ Pushbuttons-The 6 numbered pushbuttons allow you to return to the preselected stations. The customer can select 1-18 stations (6 AM, 6 FM1 and 6 FM2).
Perform the following steps in order to preset the stations:
1. Turn the radio ON.
2. Press the AM-FM in order to select the band.
3. Tune in the desired station.
4. Press 1 of the 6 numbered pushbuttons until SET appears on the display.
Whenever the customer presses that numbered pushbutton, the station that was set will return.
5. Repeat the steps for each pushbutton.

Refer to RPO List Application and ID