Instrument Panel (IP) - Insulator Panel Replacement - Left Side

Instrument Panel Insulator Panel Replacement - Left Side

Tools Required

J 38778 Door Trim Pad Remover


Removal Procedure





1. Use the J 38778 in order to remove the push-in retainers from the left instrument panel (IP) insulator.
2. Lower the insulator from the IP. Rotate the courtesy lamp counterclockwise.




3. Pull the left IP insulator rearward from the stud at the accelerator pedal.




4. Remove the left IP insulator.



Installation Procedure





1. Position the courtesy lamp into the left IP insulator. Rotate the courtesy lamp clockwise to secure correctly.




2. Align the IP insulator with the stud at the accelerator pedal.




3. Install the left IP insulator to the instrument panel.
4. Install the push-in retainers to the left IP insulator.