Mirror Face Replacement

REMOVAL PROCEDURE

CAUTION: When working with any type of glass, use approved safety glasses and gloves to reduce the chance of personal injury.

IMPORTANT: The mirror face can be replaced without removing the entire mirror housing.

1. Carefully push the mirror face on one end to gain access to the retainer on the rear side.
2. Carefully pull the mirror face in order to disengage the mirror face from the mirror housing.
3. Disengage the plastic clips on the back side of the mirror face.
4. Remove the mirror face from the mirror housing.

INSTALLATION PROCEDURE
1. Position the mirror face on the mirror housing.
2. Install the mirror face to the mirror housing, pressing into place until fully seated.