Fog Lamp Replacement - Front

REMOVAL PROCEDURE




1. Remove the nuts from the fog lamp.




2. Remove the fog lamp from the front bumper fascia




3. Disconnect the electrical connector from the fog lamp bulb.




4. Remove the fog lamp bulb from the fog lamp, turning counterclockwise, if required.

INSTALLATION PROCEDURE




1. Install the fog lamp bulb to the fog lamp, turning clockwise, if required.




2. Connect the electrical connector to the fog lamp bulb.




3. Install the fog lamp to the front bumper fascia.

NOTE: Refer to Fastener Notice in Service Precautions.




4. Install the nuts to the fog lamp.

Tighten
Tighten the fog lamp to 2 N.m (18 lb in).