Instrument Panel Cluster (IPC) - Replacement

Instrument Cluster Replacement (Pontiac)

Removal Procedure






Caution: Refer to SIR Caution in Service Precautions.

1. Disable the SIR system. Refer to Disabling the SIR System in Restraint Systems.
2. Remove the instrument panel trim pad.
3. Remove the screws (1,3) from the top of the cluster (2).
4. Pull the cluster (2) rearward.
5. Disconnect the electrical connector.
6. Remove the cluster (2).

Installation Procedure




1. Install the cluster (2) to the instrument panel.
2. Install the screws (1, 3) at the top of the cluster (2).
3. Install the instrument panel trim pad.
4. Enable the SIR system. Refer to Enabling the SIR System in Restraint Systems.