| Crankshaft End Play | 0.0034-0.0095 |
| Out of Round | 0.0002 |
| Out of Round Maximum | 0.0002 |
| Flange Runout Maximum | 0.00120 inch |
| Flywheel Fit | 0.0000-0.0005 inch |
| ID Balancer | 1.2992-1.3004 inch |
| ID of Seal Diameter on Crank | 3.2210-3.2299 inch |
| Main Bearing Journal Diameter | 2.3l622-2.3631 |
| Runout of Crankshaft at the Flywheel Flange Maximum | 0.002 inch |
| Runout of Crankshaft Maximum | 0.002 inch |
| Runout of Seal Surface | 0.002 inch |
| Straightness, Taper | 0.0003 inch |
| Stroke of Crank | 3.70 inch |
| Timing Gear Fit to Crankshaft Snout | 1.3004-1.3016 inch |
| Width, Main Thrust Bearing Journal No. 3, Including Fillets | 1.0959-1.0989 |