Cylinder Bore Data/Specifications
| Cylinder Bore Diameter | 3.5430 - 3.5435 |
| Out Of Round Maximum | 0.0004 |
| Runout Rear Face of Block to the Crankshaft. Center Line Maximum | 0.002 |
| Taper Maximum. Top to 106 mm ((4.173 inch)) Down | 0.0003 |
| Cylinder Bore Diameter | 3.5430 - 3.5435 |
| Out Of Round Maximum | 0.0004 |
| Runout Rear Face of Block to the Crankshaft. Center Line Maximum | 0.002 |
| Taper Maximum. Top to 106 mm ((4.173 inch)) Down | 0.0003 |