Trunk / Liftgate Striker: Service and Repair

Rear Compartment Lid Latch Striker Replacement

Removal Procedure




1. Remove the lock striker nuts (3).
2. Remove the lock striker reinforcement plate (2).
3. Remove the lock striker (1).

Installation Procedure




1. Install the lock striker (1).
2. Install the lock striker reinforcement plate (2).
3. Close the compartment lid.
4. Align the compartment lid.

Notice: Refer to Fastener Notice in Service Precautions.

5. Install the lock striker nuts (3).

Tighten the nut to 10 N.m (89 lb in).