Front Seat Adjuster Replacement (Passenger)

Front Seat Adjuster Replacement (Passenger)

Removal Procedure

1. Remove the driver or the passenger front seat.




2. Remove the adjuster return spring assembly (1).
3. Perform the following actions in order to remove the adjuster locking wire assembly (4):

1. Squeeze the hooked end of the seat adjuster locking wire together.
2. Slide the retaining spring.
3. Remove the spring from the seat adjuster lock bar.




4. Remove the right front seat E-Z entry adjuster cable (3) from the seat adjuster.
5. Remove the seat adjuster bolts (1).
6. Remove the seat adjuster (2) from the seat.

Installation Procedure






Important: Verify that the right seat adjuster (3) and the left seat adjuster (5) sliding mechanisms are in the same position, when you install the seat adjuster.

1. Install the adjuster (3,5) to the seat bottom frame.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the seat adjuster bolts (2).

Tighten the seat adjuster bolts to 24 N.m (18 lb ft).




3. Install the E-Z entry adjuster cable to the seat adjuster.
4. Perform the following actions simultaneously in order to install the adjuster locking wire assembly (3):

* Attach the wire (3) to each adjuster.
* Squeeze the hooked end of the seat adjuster locking wire (3) together at each end.
* Slide the retaining spring at each end.

5. Install the adjuster return spring assembly.
6. Install the driver or the passenger front seat.