Idler Pulley: Service and Repair

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Service Precautions.





1. Disconnect the negative battery cable.
2. Remove the drive belt. Refer to Drive Belt Replacement.
3. Remove the idler pulley bolts.
4. Remove the idler pulley.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the idler pulley.
2. Install the idler pulley bolts.
^ Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Install the drive belt. Refer to Drive Belt Replacement.
4. Connect the negative battery cable.