Instrument Panel Cluster (IPC) - Indicator Lamp Replacement

REMOVAL PROCEDURE
Use the following procedure in order to change any instrument panel bulb, instrument warning bulb, or cluster illumination bulb.
1. Remove the instrument panel cluster.

IMPORTANT: Some bulbs/sockets are LEDs and are soldered to the cluster circuit board.

2. Twist the bulb/socket assembly (2) counterclockwise in order to remove the bulb/socket assembly from cluster.

INSTALLATION PROCEDURE
1. Install the bulb/socket (2) into the cluster. Turn the socket clockwise in order to tighten the socket.
2. Install the cluster into the instrument panel.