Fog Lamp Replacement - Front

REMOVAL PROCEDURE
1. Disconnect the connector from the foglamp assembly.

CAUTION: Refer to Halogen Bulb Caution in Service Precautions

2. Remove the fog lamp bulb from the fog lamp assembly.
Twist and pull outward on the bulb.
3. Remove the fog lamp assembly retaining nuts (2).
4. Remove the assembly. (1)

INSTALLATION PROCEDURE
1. Install the fog lamp assembly (1).

NOTE: Refer to Fastener Notices in Service Precautions

2. Install the fog lamp assembly bolts (2) in order to secure the fog lamp bracket to the fog lamp.

Tighten
Tighten the fog lamp assembly retaining nuts to 6 N.m (53 lb in).

3. Install the fog lamp bulb to the fog lamp assembly. Ensure the unit is retained.
4. Connect the fog lamp connector to the fog lamp assembly (1).