Vehicle Preparation

Aim the headlamps in order to obtain proper illumination of the road. Test the headlamp aim under the following conditions:
^ A new headlamp, halogen bulb assembly is installed.
^ Service or repairs to the front end area that may have disturbed the headlamps or the headlamp mountings.

Headlamp focus sets when the unit is made. No adjustment for focus is necessary or possible.

IMPORTANT: Some state and local laws specify requirements for headlamp aim. Follow these laws. An adjusting screw on the other side of the headlamp assembly controls the horizontal aim. An adjusting screw in the upper inboard area controls the vertical aim. Adhere to the following instructions when aiming the headlamps.

Aim Preparation
Perform the following actions in order to prepare the vehicle for aiming the headlamps:
^ Completely assemble all of the components on the vehicle.
^ Stop all of the unnecessary operations or work on the vehicle that affects the vehicle trim.
^ Close the doors.
^ Stabilize the suspension.
^ Verify that the fuel level is full.
^ Rock the vehicle sideways.
^ Verify that the tires are inflated to the proper pressure.
^ The driver or the equivalent weight 75 kg (165 lbs) must be in the vehicle.