Headlamp Aiming (Mechanical Method)
TOOLS REQUIREDJ 25300-E Headlamp Aimer
1. Prepare the vehicle. Refer to Headlamp Aiming (Preparation).
IMPORTANT: Use the universal aimer on a known level floor or calibrate the universal aimer for floor slope.
2. Select and assemble the universal adapter (5) that fits the aiming pad (2) pattern on the lens of the headlamp (1).
3. Move the adjustment rods (2) to the number that agrees with the number located on the headlamp lens.
4. Attach the adapters.
Ensure that the correct adapter is used with the correct side aimer.
5. Place the aimers with the adapters on to their respective sides.
6. Ensure that all of the adjustment rods (2) contact the aiming pads.
Add or remove an extension stud as necessary.
7. Follow the instructions included in the J 25300-E in order to aim the headlamps.