Park/Turn Signal/Side Marker Lamp Replacement

REMOVAL PROCEDURE
1. Remove the screw (1) from the side marker lamp (2).
2. Remove the side marker lamp (2) from the front fascia (3).
3. Remove the socket from the lamp assembly. Twist and pull outward.

INSTALLATION PROCEDURE
1. Install the socket to the lamp assembly. Ensure the unit is retained.
2. Install the side marker lamp (2) to the front fascia (3).

NOTE: Refer to Fastener Notices in Service Precautions.

3. Install the screw (1) to the side marker lamp assembly (2).

Tighten
Tighten the screw to 2 N.m (18 lb in).