Fuse Block Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution In Service Precautions.




1. Remove the battery ground negative cable.
2. Remove the instrument panel carrier.
3. Remove the electrical connectors.
4. Remove the fuse block from the tie bar (6), by pressing the retainer (3) and pushing.




5. Remove the wire terminals from the fuse block (1).

INSTALLATION PROCEDURE




1. Install the terminals and wires to the fuse block (1).
2. Install the fuse block (1) to the instrument panel.




3. Install the fuse block to the tie bar (6).
4. connect the electrical connectors.

CAUTION: Refer to Battery Disconnect Caution In Service Precautions.

5. Install the battery ground negative cable.