116. Valve Body and Oil Pump Assemble

Tools Required
- J 25025 Guide Pins





1. Position the control valve body and oil pump assembly, and the auxiliary valve body (21) onto the case cover (401).





2. Install M6 and M8 bolts into the indicated positions.





3. Finger start the bolts into the threaded holes in the case cover.





4. Remove J 25025 and install all of the M6 valve body bolts.
- Tighten the M6 bolts to 11 Nm (98 inch lbs.).





5. Install all of the M8 valve body bolts.
- Tighten the M8 bolts to 24 Nm (18 ft. lbs.).