Floor Shift Control Replacement

Removal Procedure





1. Remove the automatic transmission control lever handle.
2. Remove the console. Refer to one of the following procedures.





3. Remove the range select lever cable from the automatic transmission control.
4. Position aside the Park Lock Cable. Refer to Park Lock Cable Replacement
5. Remove the electrical connector.





6. Remove the automatic transmission control bolts.
7. Remove the automatic transmission control.

Installation Procedure
1. Install the automatic transmission control.





2. Install the automatic transmission control nuts.
3. Install the electrical connector.
4. Install the Park Lock Cable. Refer to Park Lock Cable Replacement.





5. Install the range select lever cable to the automatic transmission control.
6. Install the console. Refer to one of the following procedures.





7. Install the automatic transmission control lever handle.
8. Connect the negative battery cable.